- 5 resultados
menor preço: € 75,00, preço mais alto: € 167,87, preço médio: € 133,96
1
Blends of Natural Rubber : Novel Techniques for Blending with Specialty Polymers - Andrew Tinker
Encomendar
no/na ZVAB.com
€ 167,87
Envio: € 0,001
EncomendarLink patrocinado
Andrew Tinker:

Blends of Natural Rubber : Novel Techniques for Blending with Specialty Polymers - encadernado, livro de bolso

1997, ISBN: 0412819406

[EAN: 9780412819407], Neubuch, [SC: 0.0], [PU: Springer Netherlands], COMPOUND; COPOLYMER; EPOXIDHARZE; CRYSTAL; MICROSCOPY; MORPHOLOGY; NUCLEARMAGNETICRESONANCE(NMR); POLYMER; SPECTROSCO… mais…

NEW BOOK. Custos de envio:Versandkostenfrei. (EUR 0.00) AHA-BUCH GmbH, Einbeck, Germany [51283250] [Rating: 5 (von 5)]
2
Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers - Jones, K.C. Tinker, Andrew
Encomendar
no/na Amazon.de (Intern. Bücher)
€ 110,00
Envio: € 3,001
EncomendarLink patrocinado

Jones, K.C. Tinker, Andrew:

Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers - encadernado, livro de bolso

1997, ISBN: 9780412819407

Springer, Gebundene Ausgabe, Auflage: 1998, 271 Seiten, Publiziert: 1997-12-31T00:00:01Z, Produktgruppe: Buch, 2.76 kg, Chemie, Ingenieurwissenschaften, Fachbücher, Kategorien, Bücher, Ma… mais…

IN - ÍndiaCustos de envio:Auf Lager. Die angegebenen Versandkosten können von den tatsächlichen Kosten abweichen. (EUR 3.00) SSN BOOK
3
Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers - Jones, K.C. Tinker, Andrew
Encomendar
no/na Amazon.de (Intern. Bücher)
€ 75,00
Envio: € 3,001
EncomendarLink patrocinado
Jones, K.C. Tinker, Andrew:
Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers - encadernado, livro de bolso

1997

ISBN: 9780412819407

Springer, Gebundene Ausgabe, Auflage: 1998, 271 Seiten, Publiziert: 1997-12-31T00:00:01Z, Produktgruppe: Buch, 2.76 kg, Chemie, Ingenieurwissenschaften, Fachbücher, Kategorien, Bücher, Ma… mais…

Gut Custos de envio:Auf Lager. Die angegebenen Versandkosten können von den tatsächlichen Kosten abweichen. (EUR 3.00) BetterWorldBooksDe
4
Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers - Jones, K.C. Tinker, Andrew
Encomendar
no/na Amazon.de (Intern. Bücher)
€ 150,13
Envio: € 3,001
EncomendarLink patrocinado
Jones, K.C. Tinker, Andrew:
Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers - encadernado, livro de bolso

1997, ISBN: 9780412819407

Springer, Gebundene Ausgabe, Auflage: 1998, 271 Seiten, Publiziert: 1997-12-31T00:00:01Z, Produktgruppe: Buch, 2.76 kg, Chemie, Ingenieurwissenschaften, Fachbücher, Kategorien, Bücher, Ma… mais…

Custos de envio:Die angegebenen Versandkosten können von den tatsächlichen Kosten abweichen. (EUR 3.00)
5
Blends of Natural Rubber Novel Techniques for Blending with Specialty Polymers - Tinker, Andrew; Jones, K. C.
Encomendar
no/na Achtung-Buecher.de
€ 166,82
Envio: € 0,001
EncomendarLink patrocinado
Tinker, Andrew; Jones, K. C.:
Blends of Natural Rubber Novel Techniques for Blending with Specialty Polymers - encadernado, livro de bolso

1997, ISBN: 0412819406

1998 Gebundene Ausgabe Werkstoffprüfung, Compound; Copolymer; Epoxidharze; crystal; microscopy; morphology; nuclearmagneticresonance(NMR); Polymer; Spectroscopy, mit Schutzumschlag 11, … mais…

Custos de envio:Versandkostenfrei innerhalb der BRD. (EUR 0.00) MARZIES.de Buch- und Medienhandel, 14621 Schönwalde-Glien

1Como algumas plataformas não transmitem condições de envio e estas podem depender do país de entrega, do preço de compra, do peso e tamanho do artigo, de uma possível adesão à plataforma, de uma entrega directa pela plataforma ou através de um terceiro fornecedor (Marketplace), etc., é possível que os custos de envio indicados pelo eurolivro não correspondam aos da plataforma ofertante.

Dados bibliográficos do melhor livro correspondente

Pormenores referentes ao livro
Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers

Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.

Dados detalhados do livro - Blends of Natural Rubber: Novel Techniques for Blending with Specialty Polymers


EAN (ISBN-13): 9780412819407
ISBN (ISBN-10): 0412819406
Livro de capa dura
Ano de publicação: 1997
Editor/Editora: Springer
274 Páginas
Peso: 0,575 kg
Língua: eng/Englisch

Livro na base de dados desde 2007-11-05T13:42:51+00:00 (Lisbon)
Página de detalhes modificada pela última vez em 2024-01-21T11:59:28+00:00 (Lisbon)
Número ISBN/EAN: 0412819406

Número ISBN - Ortografia alternativa:
0-412-81940-6, 978-0-412-81940-7
Ortografia alternativa e termos de pesquisa relacionados:
Autor do livro: andrew jones, tinker
Título do livro: natural novel, rubber


Dados da editora

Autor: K.C. Jones; Andrew Tinker
Título: Blends of Natural Rubber - Novel Techniques for Blending with Specialty Polymers
Editora: Springer; Springer Netherland
256 Páginas
Ano de publicação: 1997-12-31
Dordrecht; NL
Língua: Inglês
160,49 € (DE)
164,99 € (AT)
177,00 CHF (CH)
Available
XV, 256 p.

BB; Hardcover, Softcover / Technik/Maschinenbau, Fertigungstechnik; Werkstoffprüfung; Verstehen; Compound; Copolymer; Epoxidharze; crystal; microscopy; morphology; nuclear magnetic resonance (NMR); polymer; polymers; spectroscopy; Characterization and Analytical Technique; Polymers; Technische Anwendung von Polymeren und Verbundwerkstoffen; BC

1 Introduction — the book and rubber blends.- 1.1 Sources of problems — and solutions.- 1.2 Blends considered.- 1.3 Strategy.- 1.4 Wider implications.- 2 Measurement of crosslink density in vulcanized blends.- 2.1 Swollen-state NMR spectroscopy.- 2.2 Network visualization microscopy.- 2.3 References.- 3 Characterization of vulcanized blends by microscopy.- 3.1 Introduction.- 3.2 Light microscopy.- 3.3 Scanning electron microscopy.- 3.4 Chemical staining.- 3.5 Chemical etching.- 3.6 Transmission electron microscopy.- 3.7 SEM-based scanning transmission electron microscopy.- 3.8 Conclusion.- 3.9 References.- 4 Estimation of crosslink density by solid-state NMR spectroscopy.- 4.1 Introduction.- 4.2 Experimental procedures.- 4.3 NMR spectra of NR.- 4.4 NMR spectra of other rubbers.- 4.5 Conclusion.- 4.6 References.- 5 NR/NBR blends — basic problems and solutions.- 5.1 Introduction.- 5.2 NR/NBR41.- 5.3 NR/Krynac 34.50 blends.- 5.4 Conclusion.- 5.5 References.- 6 Improving the morphology and properties of NR/NBR blends with NR/PMMA graft copolymers.- 6.1 Introduction.- 6.2 Methods of blending.- 6.3 Phase morphology.- 6.4 Physical properties.- 6.5 Crosslinking density distribution in the blends.- 6.6 Conclusions.- 6.7 References.- 7 Improving the morphology and properties of NR/NBR blends with polychloroprene as the compatibilizing agent.- 7.1 Introduction.- 7.2 Cure systems for NR/CR/NBR blends.- 7.3 Phase morphology of NR/CR/NBR blends.- 7.4 Conclusions.- 7.5 References.- 8 NR/NBR blends — compounding for food contact applications.- 8.1 Introduction.- 8.2 Formulations for milking inflations to meet FDA regulations.- 8.3 Formulations for milking inflations to meet BGA regulations.- 8.4 Conclusion.- 8.5 References.- 9 Novel natural rubber/ethylene propylene copolymer(EPM) blends.- 9.1 Introduction.- 9.2 Dynamic vulcanization.- 9.3 Selection of dynamic cure system.- 9.4 Dynamic vulcanization of NR/EPM blends.- 9.5 The sandwich mix cycle.- 9.6 Processing behaviour.- 9.7 Vulcanization of DV blends.- 9.8 Resistance to environmental damage.- 9.9 Preferred formulation.- 9.10 Conclusion.- 9.11 References.- 10 Natural rubber/ENR-25 blends.- 10.1 Introduction.- 10.2 Designed experiments.- 10.3 Plasticizer investigations.- 10.4 Cure systems.- 10.5 Dynamic:static modulus ratios.- 10.6 Tri-blends.- 10.7 Conclusions.- 10.8 References.- 10.9 Appendix.- 11 Partition coefficients for an ester plasticizer in black-filled blends.- 11.1 Introduction.- 11.2 Identification of exuding plasticizer.- 11.3 Estimation of Diolpate partition coefficients.- 11.4 Conclusion.- 11.5 References.- 12 Improving resistance to low temperature crystallization in NR/ENR-25 blends.- 12.1 Introduction.- 12.2 Effect of incorporating Hv-BR into NR/ENR-25 blends.- 12.3 Curative level optimization.- 12.4 Conclusions.- 12.5 References.- 13 Compounding NR/ENR-25 and NR/Hv-BR/ENR-25 blends for engineering applications 158.- 13.1 Introduction.- 13.2 Optimizing plasticizer level and masterbatch ratio.- 13.3 Mixing trials.- 13.4 Single-stage mixing for crossblending and finalizing.- 13.5 NR/Hv-BR/ENR-25 blends.- 13.6 Injection moulding.- 13.7 Conclusions.- 13.8 References.- 14 Solutions to the basic problems of poor physical properties of NR/EPDM blends.- 14.1 Introduction.- 14.2 Approaches to improving NR/EPDM blend properties.- 14.3 Mixing procedures.- 14.4 Effect of EPDM modification on crosslink density.- 14.5 Effect of EPDM modification on phase morphology.- 14.6 Interaction of modified EPDM and carbon black.- 14.7 Physical properties.- 14.8 High temperature curing effects.-14.9 Modification of different EPDM grades.- 14.10 Conclusion.- 14.11 References.- 15 Compounding NR/EPDM blends for tyre sidewalls.- 15.1 Introduction.- 15.2 Properties of comparable NR/BR and NR/EPDM blend formulations.- 15.3 Development of a NR/EPDM sidewall formulation.- 15.4 Experimental design approach.- 15.5 Crack growth testing.- 15.6 Large-scale factory mixing trials.- 15.7 Compound extrusion and tyre building.- 15.8 Initial tyre tests.- 15.9 Analysis of initial tyre testing.- 15.10 Second factory tyre building and testing trials.- 15.11 Ozone and atmospheric weathering tests.- 15.12 Conclusion.- 15.13 References.- 16 Compounding NR/EPDM blends for light-coloured applications.- 16.1 Introduction.- 16.2 General experimental procedures.- 16.3 Preparation of blend compounds.- 16.4 Comparison of physical properties.- 16.5 Formulation development.- 16.6 Weathering and ozone testing.- 16.7 Conclusion.- 16.8 References.- 17 NR/EPDM blends for extruded profile weatherstrip.- 17.1 Introduction.- 17.2 General experimental procedures.- 17.3 Initial preparation and assessment of blend compounds.- 17.4 Small-scale extrusion trials.- 17.5 Formulation development and processing.- 17.6 Conclusion.- 17.7 References.

Outros livros adicionais, que poderiam ser muito similares com este livro:

Último livro semelhante:
9789401149228 Blends of Natural Rubber (K.C. Jones; Andrew Tinker)


< Para arquivar...