2010, ISBN: 3642077285

[EAN: 9783642077289], Neubuch, [SC: 0.0], [PU: Springer Berlin Heidelberg], ATOMICFORCECMOSCOMPATIBLEMICROMACHINING; CHEMICAL SENSOR; SENSORS; MICROSCOPY, Druck auf Anfrage Neuware - This… mais…

[EAN: 9783642077289], Neubuch, [SC: 0.0], [PU: Springer Berlin Heidelberg], ATOMICFORCECMOSCOMPATIBLEMICROMACHINING; CHEMICAL SENSOR; SENSORS; MICROSCOPY, Druck auf Anfrage Neuware - This book is intended for scientists and engineers in the field of micro- and nano electro-mechanical systems (MEMS and NEMS) and introduces the development of cantilever-based sensor systems using CMOS-compatible micromachining from the design concepts and simulations to the prototype. It is also a useful resource for researchers on cantilever sensors and resonant sensors in general The reader will become familiar with the potential of the combination of two technological approaches: IC fabrication technology, notably CMOS technology, and silicon micromachining and the resulting microstructures such as cantilever beams. It was recognized early that these two technologies should be merged in order to make the microstructures smart and devise integrated microsystems with on-chip driving and signal conditioning circuitry - now known as CMOS MEMS or, with the arrival of nanostructures, CMOS NEMS. One way to achieve the merger is the post-processing micro- or nano- machining of finished CMOS wafers, some of which is described in this book. The book introduces this approach based on work carried out at the Physical Electronics Laboratory of ETH Zurich on arrays of cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of phys ical quantities such as forces and mass changes. The book is divided into three parts. First, general aspects of cantilever resona tors are introduced, e. g. their resonant behavior and possible driving and sensing mechanisms. 156 pp. Englisch, Books<

ISBN: 9783642077289

This book is intended for scientists and engineers in the field of micro- and nano­ electro-mechanical systems (MEMS and NEMS) and introduces the development of cantilever-ba… mais…

This book is intended for scientists and engineers in the field of micro- and nano­ electro-mechanical systems (MEMS and NEMS) and introduces the development of cantilever-based sensor systems using CMOS-compatible micromachining from the design concepts and simulations to the prototype. It is also a useful resource for researchers on cantilever sensors and resonant sensors in general The reader will become familiar with the potential of the combination of two technological approaches: IC fabrication technology, notably CMOS technology, and silicon micromachining and the resulting microstructures such as cantilever beams. It was recognized early that these two technologies should be merged in order to make the microstructures smart and devise integrated microsystems with on-chip driving and signal conditioning circuitry - now known as CMOS MEMS or, with the arrival of nanostructures, CMOS NEMS. One way to achieve the merger is the post-processing micro- or nano- machining of finished CMOS wafers, some of which is described in this book. The book introduces this approach based on work carried out at the Physical Electronics Laboratory of ETH Zurich on arrays of cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of phys­ ical quantities such as forces and mass changes. The book is divided into three parts. First, general aspects of cantilever resona­ tors are introduced, e. g. their resonant behavior and possible driving and sensing mechanisms. Books > Science & Nature > Math & Physics > Physics List_Books, [PU: Springer, Berlin/Heidelberg/New York, NY]<

2010, ISBN: 3642077285

Softcover reprint of the original 1st ed. 2002 Kartoniert / Broschiert Wissenschaftliche Standards, Normung usw., Angewandte Physik, Ingenieurswesen, Maschinenbau allgemein, Nanotechnol… mais…

Softcover reprint of the original 1st ed. 2002 Kartoniert / Broschiert Wissenschaftliche Standards, Normung usw., Angewandte Physik, Ingenieurswesen, Maschinenbau allgemein, Nanotechnologie, Elektronik, atomicforceCMOScompatiblemicromachining; Chemical Sensor; Sensors; microscopy, mit Schutzumschlag 11, [PU:Springer Berlin Heidelberg; Springer-Verlag GmbH]<

2010, ISBN: 3642077285

Softcover reprint of the original 1st ed. 2002 Kartoniert / Broschiert Wissenschaftliche Standards, Normung usw., Angewandte Physik, Ingenieurswesen, Maschinenbau allgemein, Nanotechnol… mais…

Softcover reprint of the original 1st ed. 2002 Kartoniert / Broschiert Wissenschaftliche Standards, Normung usw., Angewandte Physik, Ingenieurswesen, Maschinenbau allgemein, Nanotechnologie, Elektronik, atomicforceCMOScompatiblemicromachining; Chemical Sensor; Sensors; microscopy, mit Schutzumschlag 11, [PU:Springer Berlin Heidelberg; Springer Berlin]<

2010, ISBN: 9783642077289

Atomic Force Microscopy and Gas Sensing Applications, Buch, Softcover, Softcover reprint of the original 1st ed. 2002, [PU: Springer Berlin], Springer Berlin, 2010